[BaadAssGremlins] Turbine Wheel Knock Off Emblems
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] Turbine Wheel Knock Off Emblems



I can't ever do anything simple. I made the center discs and was just
going to paint the R/W/B AMC emblem on them after I painted them orange.
That was until I noticed the plastic emblem on the rear panel under the
hatch. It is 3 dimensional so I am duplicating it. First I cut and glued
2 rectangular pieces of sheet plastic together for the base and painted
it black. The I glued 2 more together slightly smaller pieces and
covered them with modelers bare metal chrome foil. This one will be
glued to the black base showing a black edge. Then I will over the bare
metal foil I will glue on a smaller piece with the R/W/B emblem painted
on it. So it will have a black edge a chrome edge and then the R/W/B AMC
emblem. After I make 4 of these I will then glue them to the orange disc
and mount them o the wheels. It should look like it came from the
factory like that.
"Doc"



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated