--- In BaadAssGremlins@xxxxxxxxxxxxxxx, "Dan M." <vegadan@xxxx> wrote: > I have a 77 hornet amx with a 258/4 spd. I was planning to hop up > the 6, but am now thinking of maybe switching to an 8. I'm new to > amc's, so I have the following questions: > > 1. Which v8 to use 290/304/360? Are they the same size phyiscally? > What years should I stay away from? they are all basically the same size all years are ok > > 2. I know that the 6 and 8's use different front crossmembers, and > that the 8 crossmemebers are pretty expensive (from what I've seen on > ebay). Does anybody know of or make some type of adapter mount that > will mate the 8 to the 6 crossmember? I made my own and used chevy mounts and about $15 metal > > 3. Will the 8 mate up the the 6 trans/bell housing? yes > > 4. Is there a big weight difference between the 6 and 8. some but not a lot > > 5. Are there any unique headaches (like wiring, clearance issues, > etc.) with this swap that I may encounter? some wires need stretched and the fuel line is on the wrong side of the motor > > Thanks in advance for any help. > > Dan Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/