Not sure this will help but there is a nice interchange brake page on my website undeer "parts listing" page. Eddie Stakes' Planet Houston AMX 713.464.8825 eddiestakes@xxxxxxxxxxxxxxxxxxxx www.planethoustonamx.com email volume is currently light; 4-7 day reply time; call if important ----- Original Message ----- From: "lumina333" <lumina333@xxxxxxxxx> To: <BaadAssGremlins@xxxxxxxxxxxxxxx> Sent: Thursday, July 14, 2005 8:46 AM Subject: [BaadAssGremlins] Re: Disc brake conversion:spindle bolts torque? > If you can't find the specific info, go with the standard torque for > the size of the fastener that you are using. That's what I did. ~Lu~ > --- In BaadAssGremlins@xxxxxxxxxxxxxxx, Joe <jgray_55@xxxx> wrote: >> Converting my 72 Gremlin to disk brakes.Using a 1977 >> hornet(Bendix) setup. What i need to know is the >> torque of the bolts that hold the caliper >> mount/spindle assy to the steering knuckle. I looked >> in my shop manual,cannot seem to find it. Do i need to >> replace these bolts or can you re-use them ? I cannot >> wait to get rid of those drums(one wheel cylinder is >> frozeup anyway).Thanks in advance,Joe > > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/