took me awhile to get anymore progress done...I did some cutting on the drivers floor under the pedals...planned to use 5 patches on it...but after I got 3 cut and welded in...I ran outta kerosene and no cash to get some...so it set till tonite needing that one patch... heres what I was up against... http://www.gremlinized.net/images/gremlin/floor/driverfloorfront1.jpg after some cutting...welding...and grinding...it ended up lookin something like this... http://www.gremlinized.net/images/gremlin/floor/driverfloorfront2.jpg pics aren't the best and could have done a better job...but it'll work...keep my feet off the ground and the carpet dry...thats all I was concerned about...also did a good deal of welding under the car tying everything together...worked out fairly well... now all that I've got planned for the body is to put the rocker back on...then I'll drop the tranny and replace the front seal...run a new fuel line to cure that fuel starvation prob...and some other stuff to...then maybe later on after shes all together I might repair the rust in the rear valence... ------------------------ Yahoo! Groups Sponsor --------------------~--> Help save the life of a child. Support St. Jude Children's Research Hospital's 'Thanks & Giving.' http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/YtqqlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/