Can anyone here help Bob with a bellhousing, and if so, feel free to reply and thanks to all who may. Eddie Stakes' Planet Houston AMX 713.464.8825 eddiestakes@xxxxxxxxxxxxxxxxxxxx www.planethoustonamx.com volume of email is currently moderate 5-12 day replies, call if important ----- Original Message ----- From: "Bob Woolfe" <Bob@xxxxxxxxxxxxxxxx> To: <Eddiestakes@xxxxxxxxxxxxxxxxxxxx> Sent: Tuesday, January 18, 2005 8:51 AM Subject: 6 cyl bell housing Eddie: I need a used bell housing off like a 81-83 Spirit that ran the 5 speed trans. for use with an after market Tremec trans. I think I have seen the 5 speed even earlier than that. If you might have one, please let me know. We are building a 360 motor and wish to use the 5 speed Tremec behind it. The center hole is the same and only about 3/4 of an inch has to be cut off the shaft of the trans. Please let me know. Bob Woolfe 352-373-6791 Wrk. 386-418-4254 Hm. e-mail: bob@xxxxxxxxxxxxxxxx or rwoolfe@xxxxxxxxxxx ------------------------ Yahoo! Groups Sponsor --------------------~--> Help save the life of a child. Support St. Jude Children's Research Hospital's 'Thanks & Giving.' http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/YtqqlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/