Re: [BaadAssGremlins] Re: Okay Gentlemen, I am convinced....

[Davis Martin <martin-davis@xxxx>]

My personal favorite is called P B Blast. I wounder if this is the same stuff?

 Davis

 Also If you don't mind drilling some holes you don't need to swap crossmembers. Set the engine in with the mounts and mark where they land on the crossmember. remove engine drill holes and bolt back in.

 

amc74hornet <AMC74HORNET@xxxx> wrote:

--- In BaadAssGremlins@xxxxxxxxxxxxxxx, "lumina333" <lumina3@xxxx> wrote:
> My Gremlin will have an AMC V8 of some sort in it. I appreciate all
> the interest, discussion, opinions, and advice. When I go to the
> local junkyards, I will look for a 401 or 360 to drop into it. Now I
> hope I can continue to depend on you folks to help me with finding
> parts, dealing with problems, pitfalls, and victories with this
> restoration project. If anyone knows where I can find a good
> engine.......LOL!

Say Amen & AMC. Just ask if you have a question. From what I see, we have quite a talented group of people here. Hopefully someone in your area can hook you up with a V8. And we can help you through any problems you might have. I would suggest starting to soak the 4 bolts that hold the crossmember into the car with a good rust buster for easy removal when you change the crossmember. My favorite is called Blaster, been useig it for about 6 years now and have found nothing better. Anyone else have a favorite?
"Doc" 




To unsubscribe from this group, send an email to:
BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/BaadAssGremlins/
   
• To unsubscribe from this group, send an email to:
  BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.