Re: [BaadAssGremlins] Re: Thanks and Another Question Too; Engine set up
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Re: Thanks and Another Question Too; Engine set up.



Hi everyone, this is neither here or there, but for years my dad used to
drail the old oil and fill the engine up with trannie fluid, usually over
the five quarts of engine oil it would hold. He would let it sit for about a
week, then redrain the engine of the trans fluid. This usually had about a
50% success rate thru the years. I also recall if the car was a standard we
would drag it then pop the clutch in a effort to free it up, that worked
sometimes too. I have some PB Blaster and boy that stuff works great on
freeing things up, but have never used it in spark plug holes; have used
Marvel Mystery Oil too, and that works great again, have never used that
though for freeing up frozen engines, only mixed with oil and sometimes when
bored pour in some of that in the tanks to clean them out of a already
running engine. Good luck with your Gremlin,
Eddie Stakes' Planet Houston AMX www.planethoustonamx.com
----- Original Message -----
From: "hemmigremmie" <hemmigremmie@xxxx>
To: <BaadAssGremlins@xxxxxxxxxxxxxxx>





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated