[BaadAssGremlins] Re: Gremlin Engine Removal - Help?

["Davis" <martin-davis@xxxxxxxxxxxxx>]

--- In BaadAssGremlins@xxxxxxxxxxxxxxx, "Steve" <skonkle@...> wrote:
>
> Trying to pull the 232 out of a '78 Gremlin for a rebuild, and 
running 
> into some difficulties.
> 
> I can't seem to get the last tranmission bolt off. It is in tight 
> against the firewall on the top left of the tranmission. The bolt 
seems 
> to be a little stripped, and getting a wrench in at the right angle 
is 
> a b!7c#.
> 
> Any tips from someone who has ran into this?
>
I use a swivel and a 9/16" socket and lots of extensions. It is 
definitly tight! You may need to pull down on the tranny.
 Davis  



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/