[BaadAssGremlins] Re: Engine Bay Progress

["lumina333" <lumina333@xxxxxxxxx>]

It was easy to do, Bart. You have to take out the head lights, 
disconnect them, and thread the plugs back through the front wall. I 
backed the plastic ties out with a hammer and unscrewed all the 
other metal hangers. Then I hung them over the side of the car and 
put them inside a white plastic trash bag to keep them all together. 
I took off the brake lines but cut a couple of them off on the sides 
since I will be bending new ones. Oh yeah, I disconnected the washer 
tubing also and bundled it up along with the wires. ~Lu~
--- In BaadAssGremlins@xxxxxxxxxxxxxxx, baadass73gremlin@xxxx wrote:
>  
> In a message dated 3/14/05 9:30:40 P.M. Eastern Standard Time,  
> lumina333@xxxx writes:
> 
> I took  advantage of the nice weather here this weekend. I finally 
> finished  sanding and prepping the engine bay. I put 2 coats of 
> primer/filler on it.  I even took the wiring harness, brake lines, 
> and headlights off to get to  all the nooks & crannies with 
> sandpaper. See a photo of my work in my  file. ~Lu~
> 
> 
> 
> Lu,how hard was it to remove the wiring harness?
> Bart





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Give the gift of life to a sick child. 
Support St. Jude Children's Research Hospital's 'Thanks & Giving.'
http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/