Re: [BaadAssGremlins] Re: Get on Doc's Bad Motorola and Ride
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Re: Get on Doc's Bad Motorola and Ride



Thanks Eddie but pic's from a Rebel and yours is a V8 right? won't help
me. It has to be a Hornet 258 with P/S & A/C. For a V8 conversion all I
have to do is look at my son's Javelin. The only clearance problem he
has is if his car was an A/C car which it is not. As soon as I get the
spare brackets and Motorola fan I am off to the machine shop to have the
Motorola fan machined to fit the Delco. Then I can see if there are
other clearance problems. The power steering box is the main clearance
problem. This Alt. thing is getting really old as this is the only one
out of my 3 cars that has working A/C.
"Doc" 







--- Begin Message --- Doc, you sure seem to be having a crap time with the Motorolas, sure have
wasted a lot of time it seems with fooling with those boogers. Good luck and
again if I have some time this week to take some photos of possibly the
Rebel's Delco alt setup, will do that for you and post it here, then later
add photos to my website. Just have to get time to do so!
Sorry about the bad pun, so if Sammy Hagar is reading this, my apologies to
reference to his song I just butchered! See you,
Eddie Stakes
www.planethoustonamx.com

----- Original Message -----
From: <AMC74HORNET@xxxx>
To: <BaadAssGremlins@xxxxxxxxxxxxxxx>
Sent: Tuesday, August 24, 2004 4:29 AM
Subject: [BaadAssGremlins] Motorola In A 74 Hornet 258


I just read your Delco conversion Eddie on your site. First of all I
have power steering which  leaves you marginal clearance even on a stock
Motorola. The Delco's clearance problem is that the front part of the
alt bracket where the bolt goes through and then through the alt itself
and then into the "L" bracket bolted into the side of the block. This on
a 74 is a "C" shaped bracket with the upper adjustment built into it.
The fan on the Delco alt diameter is 5" 's and the one on the motorola
is 4 1/2''s, hence the clearance problem with the fan. I even checked if
a Delco off of a 79 Concord was smaller and would fit, it wasent. Now
even with another rebuilt Motorola there is a problem with a stretched
belt and you can't quite get the belt tight enough without grinding a
little on the steering box for clearance. I hope this Motorola is good
as the last 2 weren't. The one I installed last October lasted barely
1,000 miles before crapping out. It had an intermitting alt light when
the engine was turned off. The one just removed from the car had the alt
light stay on al the time with the engine turned off. Both the symptoms
indicate a bad diode. I hope this Motorola is good, because if it is it
is staying. Since I don't have a stereo or any big draw items in the car
other than the A/C and rarely drive after dark the 35 amp Motorola
should work fine. Now after this fiasco I can't wait to find out how
much all this is going to cost me.
"Doc"








Yahoo! Groups Links








--- End Message ---


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated