Re: [BaadAssGremlins] Re: Holley GuRu's........and update

[Davis Martin <martin-davis@xxxx>]

John,

 I changed the idle squirter to a 31 and that helped, but didn't cure. Then My timming jumped and the car wouldn't start. After troubleshooting I discovered my distributor gear stripped! I went to a local jeep guy and he had a set of gears but I needed to know why they stripped. Upon further inspection, the gear was riding too high. I then discovered that there was 2 gaskets under the distributor! The engine is back together now and is running good. Still a slight stumble. I went to pull it outta the garage and it wouldn't move. The new shifter cable melted again! I can't figure out why as it is ziptied away from the heat sources. I have a heavy duty cable on order and will cover it with better shielding.

 I also have a coolant leak from not waiting till the silicone dried. So I have to fix that along with the shifter cable.

 We went to the track today only to get rained out again.

 But on the up side we came apon a bikini car wash and had the race car and truck washed :o)>

 Davis

John <jsteph22@xxxx> wrote:

> -Did you get the off idle stumble problem ironed out?
> Just curious, John
> -- In BaadAssGremlins@xxxxxxxxxxxxxxx, "Davis" <martin-davis@xxxx> 
> wrote:
> > Hey guys,
> >  I have a stumble off idle on my holley 4150 650 DP. What can I do 
> to 
> > cure it? The carb was rebuilt. 
> >  Thanks,
> >  Davis