Re: -Brien's advice-

["lumina333" <lumina3@xxxx>]

Brien,
I really appreciate all your good advice! I have printed off all your 
posts and am keeping them with my car notes for reference. 
I saved the A/C condensor(radiator) from the Gremlin before I pulled 
the 232. Since I am not installing the A/C system back into the car, 
can I just use that part for the trans cooler? It can bolt right back 
in where it was originally w/o any new modifications to the bracket 
on the body.
-Lu-
****************************
> Ok Lu !
> 
> That TorqueCommand 727 is a great trans. - 
> if you plan to run it - go for that B&M 4 extra quart
> trans pan.
> 
> You can find an Automotive AC condensor core from
> a pick & pull - it is the AC radiator they call condensor .
> 
> Find one that fits nicely infront of your radiator - use
> some rubber spacers to hold it away from your regular
> radiator - so as not to transfer heat to your trans. fluid.
> 
> You can use Tie Wraps to secure the Trans cooler to
> the radiator .
> 
> Once you get the AC condensor - measure the size of
> the tube O.D. (outside diameter) and contact Earl's Supply
> for some braze on ends - get them mounted and install
> your Custom Trans Cooler .
> <snip>
- and if you are not
> certain - ASK QUESTIONS !!! There are some 
> very Talented AMC people available - to help - 
> for FREE !
> Brien. 
> NEW YORK