Unless the ground wire between the dist and the box is burned up or the pickup coil shorted, I haven't had a gold box go bad. (Ground wire usually gets burnt up by the battery ground to motor coming loose causing feedback) I assume you already soldered the dist wires after removing the easily corroded connector? I had to unplug mine and clean it once a year because my boss didn't believe in cutting it off even when I showed him the TSB on it. Fri, 17 Apr 2015 16:54:36 -0400 From: Marc Montoni <Freedom@xxxxxxxx> To: amc-list@xxxxxxxxxxxxxxxxx Subject: Re: [AMC-list] Motorcraft Ignition Message-ID: <20150417205458.D5F8C8DB0120@xxxxxxxxxxxxxxxxxxxx> Content-Type: text/plain; charset="us-ascii" Last May I was looking for a complete Motorcraft setup for my 77 Matador. I never did end up finding a Motorcraft setup, so I ended up working on the Presto to get it working again. Well, the cheap-a** Chinese replacement module burned up this week, so I'm at the point where I'm going to need to make the changeover or fix the Presto again. I'd much rather have the Motorcraft. Once again, I'm giving you guys first shot at my money. I need the complete Motorcraft V8 setup. This means the distributor, the Motorcraft wirting harness, and the computer. On the chance no one has a setup they want to sell, I would appreciate any recommendations on which AMC vendor I should go to to buy an HEI setup. -- Marc Sent from my iPhone -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20150418/fe1ec32f/attachment.htm> _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com