Re: [AMC-list] mold making and AMC listers

[Stu <amckiwi@xxxxxxxxxxxxxxx>]

He was known as "Doc" he has passed away
Stu
Melbourne
Australia

Sent from my phone

On 22/06/2013, at 10:36 AM, "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx> wrote:

> Yes, you are correct. I remember the guy and his posts, just not his name. He was in rough health but was buying selling and building AMC models to the end.
> 
> I still think you may be better off building the mold out of fiberglass. It will take a lot more money invested in silicone and just as intricate of a mold frame to do it in silicone. Especially if the part has any size to it at all.
> 
> Armand
> ----- Original Message ----- From: <tnmorrison@xxxxxxxxxxxxx>
> To: <amc-list@xxxxxxxxxxxxxxxxx>
> Sent: Friday, June 21, 2013 8:32 AM
> Subject: [AMC-list] mold making and AMC listers
> 
> 
>> I guess urethane won't be on my list of items to make a bumper corner if
>> it won't hold up to,well, bumping and such, but using silicone to make a
>> mold, then go with fiberglass, which I have used, would be the next easy
>> option. I don't think it was John Elle; I definitely remember the guy I
>> was thinking of passing on. His last project, after an ORANGE Hornet, was
>> a Matador(I think). He did a lot of model-making, too; talked about it a
>> lot. Not going to go poking around the archives to find out, though.
>> 
>> _______________________________________________
>> AMC-list mailing list
>> AMC-list@xxxxxxxxxxxxxxxxx
>> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
> 
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com