[AMC-list] Remove flexplate from '68 232 w/ automatic

[Bruce Griffis <bruce.griffis@xxxxxxxxx>]

cross-posted on theamcforum:
I started working on my engine swap. I pulled the automatic off the
232. No problems. I removed the bellhousing. I'm trying to remove the
flexplate but running into issues. When I try to turn the 9/16" bolts,
the who flexplate revolves. Should I brace a screwdriver between some
teeth to hold it still? Any tricks? If compression is good, should the
flexplate turn as I try to remove the bolts?

Any hints and tricks? Or just hit all the bolts with penetrating oil,
brace against the teeth (I'm not re-using the flexplate, I'm swapping
to manual) and use a big ol' wrench?
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com