Re: [AMC-list] Fw: bolts

[Ken Ames <ameskg@xxxxxxxxx>]

Can you get a nut splitter in there? That would be my next step. Naturally
you'll have to replace the nuts after. Sometimes you only have to partially
split them to break them loose enough to take off. 

Ken


Quoting chad chadwick <chadchadwick@xxxxxxxx>:

> > ----- Original Message ----- > From: chad chadwick > Sent: 07/20/11 03:19
> PM > To: amclist@xxxxxxxxxxx > Subject: bolts > > hi all i've got a problem,
> ive got some bults that hold the cross member to the fram , ive tryed my
> impack,  i tryed a bracker bar with a two ft.cheater  the last thing i
> tryed was a brake called b'lasterby by PB i let it set over night and nothing
> i though about using heat from a propane kit but will it sofen the the head
> when you try to turn it out, ive got three  of them and i have to remove the
> cross member, if i brake the bolt off it would b a ##### to drill out and
> retap them    " HELP" HELP" HELP"  chad 
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
> 


_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com