Re: [AMC-list] 232 Carb Spacer?

[tom jennings <tomj@xxxxxxx>]

It was for PCV. They always break off! What I did once was find a short
piece of 3/8" (I think) steel brake/fuel line, drill the spacer out to fit
the OD of the tube, and epoxy it into place. Literally better than new.



On Fri, May 20, 2011 at 11:51, Keith Evenson <epd@xxxxxxxxxxxx> wrote:

> So I am working on a 66 Rambler with a 6 cyl and under the 2V carb is about
> a 1/2 " spacer that has a hose connected to the corner. The one on the car
> looks like it used to have a nipple on it but it is broken off. Can anyone
> tell me what it is called, what it does and where I can get one that does
> not have the nipple broken off?
>
> Thanks Keith
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20110520/c4e79c58/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com