Re: [AMC-list] Gremlin with Overdrive Question

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" Date: Sun, 20 Feb 2011 07:50:25 -0800 (PST)
" From: Joe Fulton <piper_pa20@xxxxxxxxxxx>
" 
" 
" I think I already have the third 
" gear switch for the tranny.  I confirmed yesterday that the input shaft
" on the T-150 is the same diameter as the T-14.

this is a surprise to me!  everything i've read says the t14 has a
15/16" x 10 spline input with a 0.750" pilot [same as t96], while the
t150 [3sp ford toploader] has a 1 1/16" x 10 spline input with a
0.670" pilot, like a boatload of other fords, and the bearing retainer
and iirc throwout bearing are also ford.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com