Re: [AMC-list] Up to 60

[Frank Swygert <farna@xxxxxxx>]

Joe, see 
http://theamcforum.com/forum/trans-bw-m37-rebuild_topic24961.html. On 
page 3 about half-way down he mentions taking apart the valve body and 
finding one of the valves real dirty. It's not hard to drop the pan and 
valve body and give the VB a thorough cleaning. Nothing will fall out of 
the VB until you take the two halves apart with the VB out on the bench.

The filler tube you just have to replace. I typically get a piece of 
exhaust tubing bent as needed and weld a short length with the bend to 
the filler cap "holder". Then use a straight rubber hose between that 
and the tank.

-----------------------------

Date: Sun, 26 Dec 2010 18:08:17 -0800 (PST)
From: Joe Fulton<piper_pa20@xxxxxxxxxxx>

My used transmission slips a little when it shifts up when the car is cold, but
shifts?more cleanly when after the car is driven a few miles. I plan to baby
it and check the transmission pressure next weekend.



--
Frank Swygert
Publisher, "American Motors Cars"
Magazine (AMC)
For all AMC enthusiasts
http://www.amc-mag.com
(free download available!)

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com