Re: [AMC-list] 4.0 to 4.2 question

[wrambler242@xxxxxxxxxxx]

Its back toward the intake side of the head. Check throttle body. 3 bolts is renix. 4 is HO. Should be 7120. Also HO ecu is beside left inner fender. Renix under dash. 
------Original Message------
From: Richard Estermyer
Sender: amc-list-bounces@xxxxxxxxxxxx
To: amc mail
ReplyTo: AMC, Rambler, Nash, Jeep and family
Subject: [AMC-list] 4.0 to 4.2 question
Sent: Mar 18, 2010 7:04 PM


Hey Gang,

I had done reading on the 4.0 head swap and suggesting the use of the #7120 head casting of the 4.0 head circa 1990.  Does anyone know where the casting number would be located on the head?  I'm looking at a 1991 and want to make sure I am on track.

 

THANKS ALL!

Blessings,
Richard 
Richard Estermyer 


 		 	   		  
_________________________________________________________________
Hotmail is redefining busy with tools for the New Busy. Get more from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:WL:en-US:WM_HMP:032010_2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100318/fb437bd4/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com


Sent from my BlackBerry® wireless device from U.S. Cellular
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com