Re: [Amc-list] Hornet lowering

[Wrambler <wrambler242@xxxxxxxxxxx>]

Have some lowering plates constructed or make some yourself.
They mount between the spindle and knuckle.
3/8" steel flat plate will work. 
Note, the plates will widen your front track 3/8" perside so if tire clearance is an issue they won't work.
The plates on mine lower the car 1 5/8". 
They have been in place some 6-8 years with no issues.

Somewhere on one or both of the AMCforums there are specs to make plates like mine.


Mark Price
Morgantown, WV 26508
1969 AMC Rambler, 4.0L, EFI, T-5
2004 Grand Cherokee Laredo, 4.7L, Quadratrac II
"I realize that death is inevitable.
I just don't want to be around when it happens!"

----- Original Message -----
From: "Michael Canada" <gcanada@xxxxxxxxx>
To: Amc-list@xxxxxxxxxxxx
Sent: Sunday, February 8, 2009 5:43:30 PM GMT -05:00 US/Canada Eastern
Subject: [Amc-list] Hornet lowering

I need some information on lowering my 1977 Hornet AMX. I want to lower my car but, do not want to mess up the front end alignment.  The car has a 401 auto, 50 series tires 15x8 wheels.  Any help on this would be appreciated. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://splatter.wps.com/pipermail/amc-list/attachments/20090208/a3bd6009/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list