Re: [Amc-list] 390 vs. 401 crank casting numbers ....
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Amc-list] 390 vs. 401 crank casting numbers ....



304 and 360 cranks are the same....3.44 stroke and can be 
interchanged...the balance difference is external......
390 stroke 3.574 ... 401 stroke 3.68 .. both forged
Jim
Nampa, ID

Wrambler242@xxxxxxxxxxx wrote:
> You're correct in everything except the stroke on the 390-401 crank being the same.
> If it was Greg would not be gaining 10cu.in. by using a 401crank over the 390 crank.
>
> Not, 100% sure the 304 and 360 cranks are 100% the same, IIRC they are balanced different from the factory for the larger 360 pistons?  
>
>  -------------- Original message ----------------------
> From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>
>   
>> Greg,
>>
>> I thought I read somewhere about clearance problems putting a 401 crank in a
>> 304. Could you please confirm that the 401 crank and rods actually fit into
>> the 304 block without interference problems?
>>
>> Gang,
>>
>> IIRC cast cranks have a very fine parting line,
>> & forged cranks have a larger wider parting line
>>
>> 304 and 360 used cast cranks, same stroke.
>>
>> 390 and 401 are forged, same stroke.
>>
>> Is this correct??
>>
>> Can any 304 crank be used for the crank in a 360?
>>
>>
>>
>> thanks,
>> Armand
>>
>>
>>
>>
>> ----- Original Message ----- 
>> From: "Greg Taylor" <amundaza@xxxxxxxxx>
>> To: "AMC-LIST" <mail@xxxxxxxxxxxx>
>> Sent: Monday, November 10, 2008 12:13 PM
>> Subject: [Amc-list] 390 vs. 401 crank casting numbers ....
>>
>>
>> Hey guys,
>> Got news that the crank for my 304 stroker may indeed be a 401 crank,
>> instead of the 390 crank ... which changes things a bit ... by +10 CID and
>> perhaps a few $$$$ for the stroker build.
>>
>> Does anyone on the list have casting numbers for the 390 and 401 cranks?
>>
>> I bought this crank from Kenedy back around 1993 or 1994 for $390, new in
>> the box with AMC bearings. It is the earlier "BW" crank, which I had the
>> adapter machined into the rear flange, for the 727 tranny. Also had it cross
>> drilled.
>>
>> Thanks for the information, guys!
>>
>>
>>
>> Sincerely,
>> Greg Taylor :) <><
>> Rochester Hills, MI
>> 1989 Jeep Grand Wagoneer "TRMN8R2"
>>
>> And the testimony is this, that God has given us eternal life, and this life
>> is in His Son. He who has the Son has the life; he who does not have the Son
>> of God does not have the life. - 1 John 5:11-12
>>
>>
>>
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://splatter.wps.com/pipermail/amc-list/attachments/20081110/8c9134e8/attachm
>> ent.htm
>> _______________________________________________
>> Amc-list mailing list
>> Amc-list@xxxxxxxxxxxx
>> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
>>
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG.
>> Version: 7.5.549 / Virus Database: 270.9.0/1778 - Release Date: 11/9/08 2:14
>> PM
>>
>>
>> _______________________________________________
>> Amc-list mailing list
>> Amc-list@xxxxxxxxxxxx
>> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
>>     
>
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
>
>   

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated