[Amc-list] Roller Rockers

["Bruce Hevner" <scramblr@xxxxxxxxxxx>]

You can run roller rockers on the early heads but check and make sure the
pushrod slots in the heads are not worn.
 If it was me I would go ahead and put guide plates on it and drill out the
cast in slots. That way if you have a problem and wear out a slot in the
plates its simple to replace them. If you wear out a slot cast in the head
you'll be taking the head off to install plates anyway.
But HEY,,, that's just me!
Bruce Hevner
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://splatter.wps.com/pipermail/amc-list/attachments/20081014/0599fd08/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list