Re: [Amc-list] seat belt install

[Keith Evenson <epd@xxxxxxxxxxxx>]

That is what I thought but the bolt on mine goes thru a loop on the  
back side of the seatbelt loop. So the cover loop has to be in place  
when you put the bolt in the hole.

Keith



On Jul 22, 2008, at 4:40 PM, Chris Peters wrote:

> Kinda hard to describe, but I'll try.
>
> Fold the belt back over the mounting tab, then you can pull the  
> cover back,
> exposing a loop of seatbelt, and get to the bolt head.  After it's  
> tight,
> pull the loop back in, and fold it back over the right way.
>
> ------------------------------
>
> Message: 11
> Date: Tue, 22 Jul 2008 12:08:17 -0500
> From: Keith Evenson <epd@xxxxxxxxxxxx>
> Subject: [Amc-list] seat belt install
> To: AMC/Rambler@xxxxxxxxxxxxxxxx, owners@xxxxxxxxxxxxxxxx,	"drivers
> 	and fans." <amc-list@xxxxxxxxxxxx>
> Message-ID: <4F5E9812-EA12-43C9-84F3-9124A14B50F2@xxxxxxxxxxxx>
> Content-Type: text/plain; charset="us-ascii"
>
> I just got some seat belts for my AMX and am trying to figure out how
> to tighten the bolts with the plastic/rubber cover on the shoulder
> straps.  With the bolt thru the belt and thru the plastic cover how
> do you get something in there to tighten them? Is there a way to do
> this that I am not seeing?
> Thanks for the help.
>
>
> Keith
>
>
>
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://splatter.wps.com/pipermail/amc-list/attachments/20080722/7376a871/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list