Re: [Amc-list] Wheel studs for '65 American - what size?

["Bruce Griffis" <bruce.griffis@xxxxxxxxx>]

Thinking these might do the trick!
https://www.dormanproducts.com/cgi-bin/vm91corp30r/item-dtl.w?sid=0x00dc7601&item=610-092&icrid=0x001cd9c4&clt=hwrap1&vsrch_str=&vsrch_brand=&vsrch_cat=&st_amount=&end_amount=&start=&vfrom=&prev=&vnext=&category_list=:0


On Wed, Apr 16, 2008 at 5:16 PM, Bruce Griffis <bruce.griffis@xxxxxxxxx> wrote:
> I picked up replacement wheel studs at my friendly local automotive
>  parts supply shop. Brought 'em to the machine shop. The shanks are
>  just right for the hub, but too short to fit through the hub and
>  center in the drum. Looks like I need a 3/8" shank(?). Anyone know
>  off-hand the part-number or size I should look for?
>
>  Looks like the thread wants to be appr. 7/8"s inch long. Shank appr
>  3/8" long.What's the thread size, is it 1/2-20? Anyone have a part
>  number?
>
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list