Re: [Amc-list] Rogue, or American front door panel backs

[Wrambler242@xxxxxxxxxxx]

Most builders nowadays use abs sheets. They don't warp or fall apart. if your vinyl is good that is what I would do.
It is an invisible mod that will be completely unseen without pulling the panels.
  Alternately any upholstery shop can get you backer boards if that is what you wish to stay with.
I did not know of the AMS sheets when I did mine and used 1/4" luan plywood sealed with polyurethane on both sides. I have since gotten for free ABS sheets to use in the convertible, Sign shops use them.

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
" I was different before people dared to be different" 

 -------------- Original message ----------------------
From: Dan Curtis <d.curtis@xxxxxxx>
> If anyone has a set of front door panels with good, non warped backs from an 
> American or Rogue that I can use for my SC/Rambler, please let me know.&nbsp; I 
> don't care if the vinyl covering is good or bad due to my vinyl being 
> fine.&nbsp; Both my front door interior panels are warped, the driver's side 
> worse than the passenger's side so I am looking for a good set to replace mine 
> with.
> &nbsp;
> Alternatively, if anyone knows a source to get new door panel backs from that 
> would be most helpful as well....thanks
> &nbsp;
> Regards, 
> Dan Curtis
> d.curtis@xxxxxxx
> 
> 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list