[Amc-list] 287 pushrods needed!!!!

["Swygert, Francis G MSgt 436 CES/CECM" <Francis.Swygert3@xxxxxxxxxxxx>]

Tubular pushrods will work. Put a bit of epoxy in both ends though and
let it set up at least over night. Make sure the ends are CLEAN first
(dip in paint thinner or mineral spirits) so the epoxy adheres well. 

You should be able to measure one of the good pushrods and order a set
from Summitt or Jegs. You need the same type ends as well. 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list