Re: [AMC-List] Overdrive Options

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: JOE FULTON <piper_pa20@xxxxxxxxxxx>
" 
" Tom J. said:
" 
" I have a T96 with OD, and the control cable and handle, in Los
" Angeles. I paid $75, it's yours for the same amount. Came out
" of a running car; it worked when removed.
" 
" However it's for a torque-tube car, Andrew may know if the
" output shaft is 100% identical to the open T96, and if only
" the tailshaft housing would swap on.
" 
" __________________
" Well I have both a t96 with O/D sitting on my slab
" here at home and a t-14 from my 76 Gremlin sitting in
" the garage.  I'll try to look at both pieces tonight
" and let you know if I think the tailshaft from the
" T-14 would swap onto the rear of the T96/OD.

i'll bet this won't work.  these trannies do not have separate
mainshafts and tailshafts, so you'd need to look for a t14 o/d
mainshaft.  the o/d adapters are probably different lengths too, as i
was told a t14-o/d was the same length overall as a t96.  and the t14
is not closely related to the t96; it looks much more like a t86 -
6-bolt top cover, etc.

i believe the o/d unit tailshaft is the same, and between open and tt
cars, with only the housing different.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com