On Thu, 17 Aug 2006, Sandwich Maker wrote: > " http://wps.com/AMC/Strut-bushing/index.html > > i see where you say the '65-up strut rod is the right length but the > control arm end is angled wrong. would it be possible to use '65-up > lower control arms on the '63-4 cars? unmodified modern bushings > could then be used. I did not try 65, but later ones do not work; wrong angle. And it's hardened, I'm not messin' with it. I know front ends were in flux from 63 up through the double-ball joint system. _______________________________________________ AMC-List mailing list AMC-List@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list or go to http://www.amc-list.com