[AMC-List] flaired drum question

[<francis.swygert@xxxxxxxxxxxxxxxxxx>]

Mark may find that it might be possible to use front drums on the rear.
The front drums are on a steel hub. Knock or press the studs out, then
knock/press the hub off. The studs are the main thing holding the drum
on, but it's a tight fit on the hub center also. The center hole may not
be the right size for the rear axle though. A bigger problem is that the
rear brakes are usually narrower than the front if they are the same
diameter. The rears are usually smaller diameter also. So they likely
won't interchange on the same car. 
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com