Re: [AMC-List] my 62 classic project

[<francis.swygert@xxxxxxxxxxxxxxxxxx>]

Get the bell from any 79 or later six cylinder manual shift car. That
has the bolt pattern for the T-5 and will bolt to the 304. If you're
using a 304 you can use the AMC 15 axle, but not with anything bigger.
It's as strong as the Dana 35 used in Jeeps with the 4.0L six, and only
those doing serious off-road traveling have problems with D35. The 4.0L
has more power than a stock 304, more like a mild built one. Then you
can use the rear from a six cylinder Concord or Spirit. If you go with
anything bigger than a 304 you'll need the AMC 20 for sure though. 


Date: Friday, May 19, 2006 10:14 PM
From: d stohler <das24rules@xxxxxxxxx>
<mailto:das24rules@xxxxxxxxx?subject=[AMC-List] my 62 classic project> 
i have been told there are bellhousings that  bolt up to a 304 and a
t-5. 
just have to figure out what cars had that combination so i can raid
them... 
as always, i am very open to other ideas and suggestions. 
   
  dave stohler


_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com