Re: [AMC-List] Torque link removal

["Todd Jesme" <jesme@xxxxxxxxxxx>]

Hey buddy, good to see you on here again!  The bracket definitely comes off,
but I suspect one of two things.  Either it's been tack welded on somewhere
that's hard to see, or it's just that corroded on there.  Advice: Hit it
harder with a bigger hammer.

Todd Jesme 

-----Original Message-----
From: amc-list-bounces@xxxxxxx [mailto:amc-list-bounces@xxxxxxx] On Behalf
Of Winslow, Ralph (GE Infra, Aviation, US)
Sent: Thursday, April 20, 2006 9:39 AM
To: AMC list
Subject: [AMC-List] Torque link removal

I want to replace the torque link bushings, preferably with urethane.  I
removed the three 3/8 bolts that hold the front bracket to the frame but it
doesn't come off.  I beat on it with my favorite tool, a 2 lb hammer with a
10 inch handle, but it doesn't budge.  
questions.  Does it come off?  How do you take it apart to change the
bushings?  
any advice appreciated
Ralph

_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.wps.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com

_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.wps.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com