Re: Adding extra 3/8 head bolts/studs on a 401 block INFO needed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Adding extra 3/8 head bolts/studs on a 401 block INFO needed



" From: "Bob" <masheen@xxxxxxx>
" 
" []
" And yet another thought:  Should you go with a 16 or 24 thread?
" Not sure which is stronger, but since the other head bolts are a 
" course thread, maybe 3/8-16 is the better way to go.

fine is usually stronger, but i agree - if the others are coarse,
stick with it.

" I'd also like to know what the bolt spacing is and if the specs we
" are talking about are applicable to all the V8's.

i don't see why not.  they're all basically the same, and if anything
it should be easier on the smaller bores.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought







Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated