Re: 83 Spirit wire connector
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 83 Spirit wire connector



That makes sense.  I dug around in the engine bay and I can see where they 
were bolted to the shock tower.  I also think I found them on the electrical 
diagram.  They're labeled "4 Inch Port Switch" and "10 Inch Adaptive Switch".  
It looks like they're directly connected to the ECM.  Since I've already done 
a Nutter bypass I can safely ignore them.

Todd

On Tuesday 17 January 2006 07:12, amcnut@xxxxxxxxxxxxxx wrote:
> The best of my recollection from my 83 Spirit---that goes to/went to a pair
> of emissions control solenoids that mounted on that shock tower, right
> between the two bolts that hold the upper control arm on.
>
> Jeff Reeves
> Auburn GA
> 94 Cherokee
> 79 Spirit GT
> 73 Javelin 401
> 72 Javelin SST
> 69 Ambassador DPL
>
> <quote>
>
> Date: Mon, 16 Jan 2006 17:40:34 -0600
> From: Todd Tomason <jayscore@xxxxxxxxxxxxx>
> Subject: Connector on 83 Spirit
> To: AMC List <mail@xxxxxxxxxxxx>
> Message-id: <200601161740.34593.jayscore@xxxxxxxxxxxxx>
>
> Can anybody identify this connector?  This is from an 83 Spirit with a 258.
> The connector sticks out of a wiring bundle by the passenger side shock
> tower.  I can't figure out what it would have been for.
>
> Thanks,
>
> Todd
>
> http://terminus.tzo.com/spirit/spirit1.jpg
> http://terminus.tzo.com/spirit/spirit2.jpg
>
>
> =============================================================
> Posted by wixList Archiver -- http://www.amxfiles.com/wixlist







Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated