That ignition solenoid should work, but it's a bit of overkill unless you need something drawing 100+ amps! A simple Bosch relay as used for headlights or aftermarket fog lights, or a horn relay if you want to have an old factory look, should be all you need. Those will pass 20-30 amps. On September 30, 2005 Greg Taylor wrote: > Hi Tom, > It just dawned on me that I could use the old style 4-post Ignition Switch > (firewall/fender mounted) for a relay. I've got one at home from my CJ-5 and > I'm going to try it out this weekend and see how it works for my application. > > If that doesn't work, I'll probably take you up on the offer for the relay & > harness. > > Thanks again for the suggestions everyone! > > Sincerely, > Greg Taylor :) <>< > Rochester Hills, Michigan USA > > But these are written that you may believe that Jesus is the Christ, the Son of God, and that by believing you may have life in his name. - John 20:31 > > > > __________________________________ > Yahoo! Mail - PC Magazine Editors' Choice 2005 > > http://mail.yahoo.com ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist