Garage topic : Cinderblock , experienced stonemason advice wanted
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Garage topic : Cinderblock , experienced stonemason advice wanted



  In order for me to make my " Gremlin Garage II " (
obligatory AMC reference ) a reality at the building I
am about to purchase in a sleepy country one-traffic
light town, I need some help with a structural
decision. 
  Here's the low-down - 3,000 sq. ft. building, comes
with an 18 x 40 foot cinderblock back "shop", with
concrete "plaster" on the outside of it. Only a 32"
standard human doorway in the cinderblock shop. Shop
has a concrete floor. I NEED to cut a big enough
opening for a car to pass thru ( actually, I hope to
pass 5-6 thru it and pack it for now ). Is there a
reasonable DIY way to do this without collapsing the
top structure? I was thinking of doing it this way :

 1) Knock out a row of cinderblocks up high.
 2) install a steel I-beam about 6" - 8" tall, and X
feet long, to support the cinderblocks above. 
 3) tie in the beam to the structure, then knock out
the blocks below it>.

  First, is this a feasible thing to accomplish for a
non-experienced stone worker to do, or should it be
left to a professional? And if so, how much would
structural work like this cost? I'd like the opening
made, so I can get the cars in, then install a garage
door later. I plan to fence in the lot behind it, so
there won't be easy access to it. They are project
cars anyway, so I'm not too worried about them. 
  A friend who does tile says normally an L-beam is
used, chip out the cement between the blocks, then
install the L-beam, bolt it to the wall, and then
knock out the blocks beneath. I "may" have access to 2
cheap I-beams, butif the L-beam is the way to go, then
I'll go the best route. 
  So, looking for anyone who can give some "free"
advice on what NOT to do, or what to do. I'm willing
to spend a couple grand to get it done right. I have
the cash, just need to make some decisions on what the
best way to go about it QUICKLY right now to open the
building up, so I'll have room for more cars on the
back lot. I have 16 or so to move, so the more space I
can "make", ie open up the shop, the more I hope to
save from inevitable destruction, with my aunt's farm
being sold, I need to move my cars ASAP.
  Anyway, that's my story, and I'm stickin' to it. Any
professional, or DIY advice from someone who's done it
much appreciated! TIA,

Jerry Casper
Woodbridge, VA
trying to save my AMC(hevy) fleet...


		
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs 

 





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated