Thanks for the clarification! I did assume they made an alteration in the shaft and/or rockers so they would fit the single stud heads. See what assuming gets you (me!)?? Now I just wonder why they decided a continuous shaft was the way to go. Machine work required, or do they leave some of the studs out? I'll have to take a look on the HS web site. On August 11, 2005 Andre K Jacobs wrote: > Steve > These are a continuos shaft. FRANK, come on, the rockers you are talking > about have been out a few years now, and are for the BRIDGED PIVOT heads. > These are NEW for the individual stud head. They are also making a > continuos shaft set up for the bridged heads, which will be better, and > stronger then the current pair set up they have. > The off set rocker is used when you move a port in a head, making in > necessary to move the push rod. > > Andre " A.J." Jacobs, > web page http://southtexasamc.tripod.com > (830)-980-3165 , akjamc@xxxxxxxx > > Owner & Proprietor, South Texas AMC ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist