Re: 727 to 518 swap...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 727 to 518 swap...



The back of the case where the OD or tailshaft attach is different between a 727 and a 518. The A500 is available with an AMC bellhousing (4 litre Grand Cherokee) and this is a much easier route to go.
Jim Mantle

On July 18, 2005 Frank Swygert wrote:

> Looking at the website I posted, there is a photo of a 727 and 518 side by side. They look identical up to the point where the tailshaft housing bolts on. The OD for the 518 is totally in the tailshaft housing. By looks alone it appears that one could possibly take an AMC 727 case and use the 518 output shaft, OD unit, and tailshaft housing to make an AMC OD trans. The 518 is 3.5" longer and would require modifying the rear crossmember (detailed on the site), but I wonder if this is possible? Or is adapting to the more plentiful GM 700R4 cheaper as well as easier??
> 
> =============================================================
> Posted by wixList Archiver -- http://www.amxfiles.com/wixlist


=============================================================
Posted by wixList Archiver -- http://www.amxfiles.com/wixlist







Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated