Re: Navarro Six, camshaft
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Navarro Six, camshaft



" From: JOE FULTON <piper_pa20@xxxxxxxxxxx>
" 
" --- Tom Jennings <tomj@xxxxxxx> wrote:
" 
" > The (Sig Erson?) cam has .305" lift at the cam, *
" > 1.5= .4575" at
" > the valve.  About 2" diameter valve (intake).
" > 
" > []
" > 
" > The fuel pump cam was not even ground; it still has
" > the mold casting line on it.
" > 
" > It's black oxide or nitrided.
" 
" 
" It might have been set up for a remote (electric?)
" fuel pump.
" 

probably more like crank-driven via belts, perhaps cog belts.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen

adh@xxxxxxxxxxxxxxxxx                       and think what none thought





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated