Andy; someone stole my American (my beater 68) and ran over a curb; bent the xmember, lower arm and dented the pan. I changed everything and it still clanged. Turned out to have been a cracked bell housing sending noises and vibrations through the pan. When I changed the pan I didn't pull the engine, you just support the engine with a 2x4 and chain, then remove everything connected to the xmember. If you have room and an uninterruped day you can swap everything in an afternoon. Use sturdy jackstands and blocks, give yourself plenty of room and turn off the phone....Russ ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs