Re: 401 flexplate..question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 401 flexplate..question



I've been running a 998 behind a 401 for almost 10 years in my Javelin. The 998 originally was behind a 304. I run 13.16 or so with it. The flexplate worked just fine. There are two sets of holes. The 904/998 uses the inner ones, the 727 the outer ones.

 

Bill Dettman




----Original Message Follows----
From: farna@xxxxxxx
Reply-To: mail-From-javelinman-hotmail.com@xxxxxxxxxxxx
To: mail@xxxxxxxxxxxx
Subject: Re: 401 flexplate..question
Date: Thu, 14 Jul 2005 10:20:15 -0400

I believe it will work with a 904, but unless the 904 has been beefed up it won't last long behind the 401 unless you take it real easy.

On July 13, 2005 Joe Gray wrote:

> Will a factory AMC (72-up)401 flexplate only fit a
> 727,or will it also work with a 904?  I have one
> (factory 401 flexplate)available to me....but not sure
> which trans i will be using yet.Thanks alot again,Joe
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - Find what you need with new enhanced search.
>
> http://info.mail.yahoo.com/mail_250


=============================================================
Posted by wixList Archiver -- http://www.amxfiles.com/wixlist











Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated