Concord Turn Signals THANKS!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Concord Turn Signals THANKS!
- From: "Richard Estermyer" <javelinman74@xxxxxxxxxxx>
- Date: Sun, 10 Jul 2005 21:21:34 -0400
Wow, after tearing the dash apart, STILL not locating it I went to the
manual and there was no real direction there except to confirm it was burned
out. I found wiring diagrams and found Pink and Dk. Blue wites, found them
pulled down and low and behold! Thanks guys.
I needed to take the dash down anyway to replace the broken speedo cable.
Interesting is that I could not find/figure out removal of dash from above
the steering column. Also could not get to overlay dash from the gauge
conglomerate! So after taking out the radio I was able to grab the speedo
cable, just need to get through the firewall and complete the rest. Don't
know how I would install a clock if I ever got one. Done Javelins dashes
right and left.
I bought a nos cable on e-bay but not really sure if it is a match, until I
get the other one out. Anyone by chance have a cable out of Concord Wagon
in case. Let me know off line.
Thanks again folks, you are the BEST!
Richard
Richard Estermyer
6235 S. Mohawk Avenue
Ypsilanti, MI 48197
734.483.5187
734.320.7066 cell
javelinman74@xxxxxxxxxxx
Check out my hobby!
www.a70sthingautomobilia.com
Back to the Home of the AMC Gremlin