More new parts coming

[Nick ALFANO <71amx@xxxxxxxxxxxxx>]

Just wanted to send you guys some updates on parts
that we have been working on.  I finally got started
on the shaft rocker set up after 5 years of talking
about it.  This will be a complete bolt on shaft setup
that will work on stock AMC heads and some of the
after market aluminum heads.  The first sets should be
done within a month or so.  These will be able to
withstand over 800lbs of spring pressure.

I am also having stud girdles done at the same time
for both 3/8 and 7/16 studs.

Guide plates are now finished.  I need to do some
testing to make sure they came out right and should be
ready for anyone who needs a set within a week.  

The 401 4340 forged I-Beam rods with 7/16 ARP cap
screws should be available soon.  I will let you know
when I have one in my hands.  Still have the 5.885"
long H-beam rods available.

Hope all this stuff is received well.  We are putting
a lot of time and money into our AMC hobby to make
sure we have all goodies that the Chevy guys have. 
Now we just need to find some molds to make quality
sheet metal.

Thanks,


Nick Alfano