If the resistance is rising with the car running (over time), the voltage will drop further. It may not heat up if the car is not running with the ignition on. On June 22, 2005 Tom Jennings wrote: > On Wed, 22 Jun 2005 farna@xxxxxxx wrote: > > > Check the resistance wire in the ignition harness. You mentioned > > the TFI coil. > > It's really easy to check the ballast/resistance wire on the car > with a voltmeter: with the engine NOT running, but ignition ON, > you should see between 7 and 9 volts on the coil "+" terminal. ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist