v8 cam oil hole location
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

v8 cam oil hole location



Message-ID:
<20050522164041.3436.qmail@xxxxxxxxxxxxxxxxxxxxxxx>
Matt,

The oil hole is located in the first cam bearing at
about 2 oclock, if you are looking at the front of the
engine, and another smaller at about 8.  If you are
using Dura Bond cam bearings there will also be a
groove that runs 360 degrees around in the center.

Nick Alfano

Date: Sun, 22 May 2005 09:40:41 -0700 (PDT)
From: Matt <keebler303@xxxxxxxxx>
Subject: v8 cam oil hole location
To: mail@xxxxxxxxxxxx

can anyone tell me where the oil hole in the front of
the block is that feeds oil to the front of the cam? i
am trying to verify my cam bearing is installed
correctly by running a paperclip through the cam oil
hole. i haven't been able to find the hole through the
bearing into the oil galley.

Matt








Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated