A good half hour with the parts books at my friendly parts store and I could not find a compatible hose. I had a new hose made at Hose Line Inc (Glendal CA local to me), cost $50 even, but it's perfect. Twice the cost of a NAPA hose, but I couldn't locate one of those.
83 258 in a 1970 hornet. Flare fittings on pump and steering gear, both on same side of car. The perfect hose was 7/16" inverted M flare 270-degree, 16" hose (ferrule to ferrule), 3/8" inverted M flare 90-degree. Fittings had 90-degree rotation on hose.
Length is absolutely perfect; no part of the host rests on anything, but if necessary I could cable-tie it over to the block if it looks like it will vibrate.