You can go to the local auto parts store and get up to 5' lengths of brake line with flares on the ends already. Just get uniions to assemble. I know it's a possible leak area, but I put a union under the car in the center anyway. It's almost impossible to install a 10' line in a car unless it's all the way apart! So I run the 5' section from the back as far forward as it will go then buy whatever length I need for the front. Just get a good bender and don't try to bend to tight. On May 10, 2005 Todd Tomason wrote: > Does anyone know anything about the brake line kits listed recently on eBay? > Take a look at item 4549438666. (Here's the link: > http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4549438666 ) > These are straight lines with the ends already flared and fittings installed. > You just have to bend them yourself. I've never heard of this before. > Anybody using these? Does it work well? > > Thanks, > > > Todd > > > > . ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist