Check Borgeson on the web. Flaming River maybe. You need diameter and spline count. You should be able to get a ujoint to double D or round shaft. For a race car that is the way I would go. Mark Price mpriceAtwestco.net Morgantown, WV 69 AMC rambler, 4.0L, EFI, 5 speed 65 Ambassador Conv, 327 AUTO, Basketcase 01 S-10 CREWCRAP 4X4 ---------- Original Message ---------------------------------- From: farna@xxxxxxx Reply-To: mail-From-mprice-westco.net@xxxxxxxxxxxx Date: Thu, 28 Apr 2005 08:45:05 -0400 >Should be a standard GM part since the rack and column were from GM. Check the HELP! section at an auto parts store. They usually have the fabric/rubber piece by itself. Drill out the rivets and replace the piece with bolts. > >On April 28, 2005 James Mantle wrote: > >> Does anyone have a steering shaft flex joint (rag joint) for a Pacer >> with manual steering? The shaft in the non power steering rack is >> smaller than with power steering, I believe the outside diameter of the >> spline is 5/8". The OEM part number is 8128682. >> I'm stuck for one for my new race car. >> Thanks >> Jim Mantle >> >> >> >> >> >> >> . > > >============================================================= >Posted by wixList Archiver -- http://www.amxfiles.com/wixlist > > > > > >