Head gaskets for Aluminum 401 heads?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Head gaskets for Aluminum 401 heads?



OK...what preferences/advice/experiences  does anyone
have as to which head gaskets to use with INDY
(SR)aluminum heads on my 401? It will be a
street/weekend race engine! FelPro stock/race, ROL
hi-temp race (thinner to increase compression)/ROL
stock?? Any other alternatives?  I'm going to lose
approx .3pts(guestimate) of compression with the INDY
heads..61CC chambers versus 58CC chambers. Was to be 
9.8/1 with 58cc...i'm guessing 9.5...with the 61cc??
with the INDY's? I'm using Speed-Pro L2380F .040
forged pistons.Can someone please verify/correct me on
my final compression ratio?  ANY help GREATLY
appreciated!!!THANKS ALOT...Joe


		
__________________________________ 
Do you Yahoo!? 
Plan great trips with Yahoo! Travel: Now over 17,000 guides!

http://travel.yahoo.com/p-travelguide





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated