Re: 2.5 4 speed found in Chero..opinions?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 2.5 4 speed found in Chero..opinions?
- From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)
- Date: Fri, 8 Apr 2005 14:17:38 -0400 (EDT)
" From: farna@xxxxxxx
"
" The FC150 should either have an L-head or F-head (overhead intake
" valve, in block exhaust valve) four, I think. I don't know what the rer
" gearing is, but likely it's around 4.10. I'm assuming the FC is 4x4.
" Assuming the Cherokee is too you should be close as far as power
" requirements. You might be better off to keep the FC axles if the front
" is set up with the t-case on the left side (axle offset to left) like
" the Cherokee, and the gears aren't lower than 4.10.
iirc it'll have 5.38s like a cj with the four. i think you can still
get gears for those old axles though.
________________________________________________________________________
Andrew Hay the genius nature
internet rambler is to see what all have seen
adh@xxxxxxxxxxxxxxxxx and think what none thought
Back to the Home of the AMC Gremlin